Monday, October 28, 2019

New life of the old kitchen


Any kitchen furniture that was manufactured in a conveyor way loses its appeal over time. Most often, it is not the cabinet itself that loses its presentability, but the front panels of the kitchen wall, i.e. her doors. Therefore, in order to make your kitchen wall look updated, it will be enough to replace the doors.
New cuisine is not cheap. Therefore, partial repair of the kitchen may be the best budget option. The kitchen wall with an old facade and new front plates will not only refresh the interior of the kitchen, but will also be able to serve you for several more years. Countertop Replacement
  
  
Replacing a kitchen worktop    The work surface in the kitchen attracts attention, constantly falling into view. Therefore, to update the kitchen, sometimes it will be enough to replace the countertop. Such countertops are available and are constantly on sale: both in the construction market and in specialized stores. They vary in appearance, color shades, quality.
    The installation of kitchen fittings is carried out before installing the panels on the kitchen wall housing. First, the place of washing is marked: adhesive tape is glued to the countertop along the future contours of the sink - an adhesive tape will protect the panel from scratches during its sawing. The line along which the cut will pass is marked at a distance of 10 mm from the edge - this will be a support for washing. In the corners of the future cut, holes are made with a ten-millimeter drill to make it easier to change the direction of sawing. The edges of the tabletop saw cuts are treated with a thin layer of silicone to protect the wood from moisture.
    The next step is processing the hole for the sink. Scotch is attached to the sink and the center punch marks the point of attachment of the sink. The hole, the attachment point of the sink, is drilled in several stages - with drills 3, 6, 12 mm.
    Next, the hole for the mixer is marked. The diameter of the hole is 35 mm. Cut it with special tools - a metal crown, a circular saw, etc. Instead of silicone, the edges of the sink are covered with sealing rubber.
    Next, the countertop is mounted on the wall housing and secured with brackets. At the end of all work with the installation of the sink, gently the cutter removes the part of the sealing tape that protrudes. Household shelves between lockers
  
  
    Kitchen furniture, consisting of several modules, does not always fill the whole place in the kitchen. In order to create a continuous plane, wall shelves can be placed in the niches between the cabinets. In the manufacture of such shelves are very simple. You will need a mounting plate sawn into several parts and overlays for the edges. Holes designed to secure the shelves are made at the same distance. Shelves are fastened with screws. Places for countersunk screw heads are best countered, so the screws will not be noticeable. Mounting a kitchen hood
  
  
Mounting a kitchen hood    Today, the installation of a chimney can be carried out by a layman. All that is needed is to make two holes under the dowels in the wall. In order to precisely mark the points for drilling, there is a template for drilling in the package for the hood. The center is marked between the lockers, then with the help of the level a vertical line is drawn, on which a template is attached with tape. The pattern marks the drilling points. Next, holes are made, and the installation of hood parts is carried out. Glass elements
  
  
    To give a more respectable look to the kitchen, you can use frosted glass in its design. For example, they can be used for revealing niches between lockers. To do this, first try on the glass directly in its future place; we make bastings for drilling holes for glass fasteners, and do not forget about the safety plastic profile. Next, the glass and the safety profile are connected, attached to the wall and pressed on top of the aluminum profile.

0 comments:

Post a Comment